This equipment is a double stages pump for evacuating air from a hermetical chamber to obtain vacuum condition. It is a new generation of vacuum pump improved on the basis of rotary vane pump against adverse condition such as dusty condition. With unique oil path and drainage structure, it can be used in a more extensive range to evacuate air containing some dust. Its drainage structure makes it possible to conveniently operate only by opening the drainage sealing board, no need to remove the pump from vacuum system.

It can be used for vacuum obtaining, drying, melting, degassing & molding in electronics, food, chemistry and architecture industries, etc, can serve individually or as a fore pump of  pressure-increasing pump, oil-diffused pump and molecular pump.

Features:
1) Low vibration, low noise by optimizing design and matching weight.
2) Supply oil singly to baring seal house, because the baring seal house and the pump house is be fenced out, it is avoided that the impurity come into the baring seal house, that beget the baring and seal to be shattered prematurely.
3) According as the consumer requisition, the subsidiary oil box can be equipped, it can make the oil cooling and the impurity separating.
4) The motor is on top of the pump besides the old model H-150. Compact structure, fewer dimension control clearance.

Its main technical data attached herein for your reference.

Example: Model H-150 Sliding Valve Vacuum Pump

Operation & Application:

H-150 Sliding Valve Vacuum Pump is a volumetric mechanic vacuum pump which is used to evacuate air in hermetical chamber. It is lubricated and sealed by pump oil and can displace gases that have not chemical reaction with oil. Coupled with ballast equipment or subsidiary device, it can also draw condensable, dusty and metal-corrosive gases.

Please see its performance & technical data attached herein for your reference.

Evacuating Speed: 152L/s

Ultimate Pressure: 1Pa (Sub-pressure), 6.5Pa (Overall pressure)

Velocity: 450 r.p.m. for pump, 970 r.p.m for motor

Designed Motor: 1.5kw power, model Y180L-6

Max. Inlet Pressure: 1.3/10000Pa

Cooling Water Consumption: 700L/H

Oil Pump: Mechanic Vacuum Pump with oil consumption 30kg

Weight: 950kg

 

Contact: Alex Li

 

Tel : +86 758 2802710

Fax :+86 758 2855892

Mobile :+86 13929890858

Email: vacuumsale@hotmail.com

MSN: vacuumsale@hotmail.com

Website: http://www.pvd-metallizer.com